Form 8-K CABOT MICROELECTRONICS For: Oct 23

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.� 20549

FORM 8-K

CURRENT REPORT

Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Date of Report (date of earliest event reported):

October 23, 2014

(Exact name of registrant as specified in its charter)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:

o	Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

o	Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

o	Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

o	Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

---

On October 23, 2014, Cabot Microelectronics Corporation issued a press release entitled "Cabot Microelectronics Corporation Reports Results for Fourth Quarter and Full Fiscal Year 2014," a copy of which is attached hereto as Exhibit 99.1 and incorporated herein by reference.� The press release contains financial and other information including that related to the Company's fourth fiscal quarter and full fiscal year ended September 30, 2014.

This information is being furnished pursuant to Item 2.02 of Form 8-K and shall not be deemed "filed" for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended (the "Exchange Act"), or incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such a filing.

---

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

---

INDEX TO EXHIBITS

EXHIBIT 99.1

PRESS RELEASE

�������������������������������������������������������������������������������������������������������������������������������������������� Contact:

�������������������������������������������������������������������������������������������������������������������������������������������Trisha Tuntland

������������������������������������������������������������������������������������������������������������������������������������������Manager of Investor Relations

������������������������������������������������������������������������������������������������������������������������������������������Cabot Microelectronics Corporation

�������������������������������������������������������������������������������������������������������������������������������������������� (630) 499-2600

CABOT MICROELECTRONICS CORPORATION REPORTS RESULTS FOR

FOURTH QUARTER AND FULL FISCAL YEAR 2014

�

�	Record Quarterly Revenue of $116.3 Million; Gross Profit Margin of 49.1 Percent; Earnings Per Share of $0.65

�	Annual Revenue of $424.7 Million; Gross Profit Margin of 47.8 Percent, Non-GAAP 48.3 Percent Excluding Second Quarter Asset Impairment Charge; Earnings Per Share of $2.04, Non-GAAP $2.10 Excluding Impairment

�	Cash Balance of $284.2 Million at Year End, After Total Share Repurchases of $53.0 Million in Fiscal 2014

AURORA, IL, October 23, 2014  Cabot Microelectronics Corporation (Nasdaq:� CCMP), the world's leading supplier of chemical mechanical planarization (CMP) polishing slurries and a growing CMP pad supplier to the semiconductor industry, today reported financial results for its fourth quarter and full fiscal year 2014, which ended September 30.

Total revenue during the fourth fiscal quarter was $116.3 million, which represents a record quarterly revenue level for the company.� The company generated 3.9 percent revenue growth from its CMP consumables products for semiconductor applications compared to the same quarter last year.� This included record quarterly revenue in its Tungsten, Pads and Aluminum product areas, which grew 13.3 percent, 14.0 percent and 15.6 percent year-over-year, respectively.� The company achieved a gross profit margin of 49.1 percent of revenue in the fourth fiscal quarter and diluted earnings per share of $0.65.� For the full fiscal year, the company recorded revenue of $424.7 million, including record revenue in its Pads, Aluminum and Advanced Dielectrics product areas.� However, overall revenue decreased by 2.0 percent for the year, primarily driven by lower sales from the company's QED Technologies business, which is primarily capital equipment-oriented, and its Data Storage product areas.� The company recorded a gross profit margin of 47.8 percent of revenue for the full fiscal year, which includes a 50 basis point adverse effect resulting from a $2.1 million asset impairment charge recorded during the second fiscal quarter.� Excluding the impairment, non-GAAP gross profit margin for the year was 48.3 percent.� The company recorded diluted earnings per share of $2.04 for the full fiscal year, which includes a $0.06 adverse impact due to the asset impairment.� Excluding the impairment, non-GAAP earnings per share for the year were $2.10.� As of September 30, 2014, the company's balance sheet reflects a cash balance of $284.2 million, which is $18.6 million higher than in the prior quarter and $58.1 million higher than last year, and $172.8 million of debt outstanding.

"We are pleased with our strong financial performance for the quarter, including record revenue, and solid results for the full fiscal year, despite a number of headwinds, including soft semiconductor industry conditions in the first half of the year", said William Noglows, Chairman and CEO of Cabot Microelectronics.� "The fiscal year was highlighted by record revenue from our Pads, Aluminum and Advanced Dielectrics product areas.� Furthermore, we believe the seven supplier excellence awards we earned during the fiscal year, including awards from Samsung and Intel, two of our most strategic customers, continue to demonstrate our ability to deliver innovative, high-quality, high-performing and reliable CMP products and solutions."

Mr. Noglows continued, "Technology node progression and new chip architectures continue to introduce new CMP challenges that we believe represent growth opportunities for our CMP consumables business.� We remain focused on supporting our customers by closely collaborating with technology leaders, and we intend to continue to develop game-changing technology, while leveraging our extensive global infrastructure and our distinctive expertise in supply chain management and quality systems.� As we enter fiscal year 2015, sentiment regarding near term semiconductor industry demand seems somewhat mixed.� Historically, we experience some seasonal softening of demand in our first fiscal quarter, and we are beginning to experience that now.� However, we remain confident in our ability to execute our strategies and continue to provide value to our shareholders over a range of industry and macroeconomic environments."

The company's record revenue of $116.3 million in the fourth fiscal quarter represents a slight increase from the same quarter last year, on 3.9 percent revenue growth from the company's IC CMP consumables products, mainly offset by lower revenue from the company's QED Technologies and Data Storage product areas.� In particular, the company achieved record revenue in its Tungsten, Pads and Aluminum product areas this quarter, and revenue from its Advanced Dielectrics product area also grew compared to the same quarter last year.

Total revenue for the full fiscal year was $424.7 million, which represents a 2.0 percent decrease from $433.1 million in fiscal 2013.� Revenue from the company's IC CMP consumables products grew slightly compared to the previous year, and the company achieved record annual revenue in its Pads, Aluminum and Advanced Dielectrics product areas, as well as growth in its Tungsten product area.� However, full year revenue results were adversely impacted by lower revenue from QED Technologies and the company's Data Storage product areas.� Foreign exchange effects also reduced revenue by $2.4 million, primarily due to the weaker Japanese yen versus the U.S. dollar.

Gross profit, expressed as a percentage of revenue, was 49.1 percent this quarter, compared to 50.9 percent in the same quarter a year ago.� Compared to the year ago quarter, gross profit percentage decreased primarily due to higher variable manufacturing costs, including higher raw material costs, partially offset by a higher valued product mix.

Gross profit margin for the full fiscal year was 47.8 percent of revenue, which includes a $2.1 million asset impairment charge related to certain manufacturing assets recorded during the second fiscal quarter.� Excluding the impairment charge, non-GAAP gross profit was 48.3 percent of revenue.� The company's full year guidance range was 48 to 50 percent of revenue.� Gross profit margin decreased from 49.0 percent of revenue in fiscal 2013, primarily due to higher variable manufacturing costs, including higher raw material costs, and the asset impairment, partially offset by benefits associated with foreign exchange rate changes.� For full fiscal year 2015, the company currently expects its gross profit margin to be between 48 and 50 percent of revenue.

Operating expenses, which include research, development and technical, selling and marketing, and general and administrative expenses, were $34.1 million in the fourth fiscal quarter, or 3.8 percent lower than the $35.5 million reported in the same quarter a year ago, primarily due to lower staffing related expenses, including incentive compensation costs, partially offset by higher professional fees.

�

�

---

�

For the full year, total operating expenses were $131.3 million, which is $4.4 million lower than last year.� The decrease was driven by lower staffing related costs, including incentive compensation costs, partially offset by higher professional fees.� The company's guidance range for full fiscal year 2014 was $127 million to $131 million.� The company currently expects its operating expense for full fiscal year 2015 to be between $132 million and $137 million.� The expected increase is primarily due to anticipated higher staffing related costs; the midpoint of this range represents a 2.4 percent increase versus fiscal 2014.

Net income for the quarter was $16.0 million, up from $15.5 million reported in the same quarter last year.� Net income was higher primarily due to a lower effective tax rate and lower operating expenses, partially offset by a lower gross profit margin.� Net income for the full fiscal year was $50.8 million.� Excluding the asset impairment, non-GAAP net income was $52.2 million, which is down from $52.6 million in fiscal 2013.

Diluted earnings per share were $0.65 this quarter, compared to $0.64 reported in the fourth quarter of fiscal 2013.� Earnings per share for full fiscal year 2014 were $2.04, or $2.10 on a non-GAAP basis, excluding the asset impairment charge, compared to $2.19 last year.

As previously disclosed, prior year net income and diluted earnings per share referenced above were revised versus the company's original disclosure.� Please refer to the company's Report on form 10-Q for the quarter ended June 30, 2014, which was filed in August, and Report on form 10-K for the fiscal year ended September 30, 2014, which the company intends to file with the SEC in November.

CONFERENCE CALL

Cabot Microelectronics Corporation's quarterly earnings conference call will be held today at 9:00 a.m. Central Time.� The conference call will be available via live webcast and replay from the company's website, www.cabotcmp.com, or by phone at (844) 825-4410.� Callers outside the U.S. can dial (973) 638-3236.� The conference code for the call is 15316704.� A transcript of the formal comments made during the conference call will also be available in the Investor Relations section of the company's website.

USE OF NON-GAAP FINANCIAL INFORMATION

The company presented the following measures considered as non-GAAP by the U.S. Securities and Exchange Commission:� gross profit margin, net income and diluted earnings per share excluding the effects of an asset impairment charge related to certain manufacturing assets the company recorded in its second fiscal quarter.� The non-GAAP financial information provided in this press release is a supplement to, and not a substitute for, the company's financial results presented in accordance with U.S. GAAP.� These non-GAAP financial measures are provided to enhance the investor's understanding about the company's ongoing operations.� Specifically, the company believes the asset impairment charge is not indicative of its core operating results, and thus presents its gross profit margin, net income and diluted earnings per share excluding the effects of such asset impairment charge.� The presentation of non-GAAP financial information is not meant to be considered in isolation or as a substitute for results prepared and presented in accordance with U.S. GAAP.� A reconciliation table of GAAP to non-GAAP gross profit percentage, net income and diluted earnings per share is contained in this press release.

ABOUT CABOT MICROELECTRONICS CORPORATION

Cabot Microelectronics Corporation, headquartered in Aurora, Illinois, is the world's leading supplier of CMP polishing slurries and a growing CMP pad supplier to the semiconductor industry.� The company's products play a critical role in the production of advanced semiconductor devices, enabling the manufacture of smaller, faster and more complex devices by its customers.� The company's mission is to create value by developing reliable and innovative solutions, through close customer collaboration, that solve today's challenges and help enable tomorrow's technology.� Since becoming an independent public company in 2000, the company has grown to approximately 1,050 employees on a global basis.� For more information about Cabot Microelectronics Corporation, visit www.cabotcmp.com or contact Trisha Tuntland, Manager of Investor Relations at 630-499-2600.

SAFE HARBOR STATEMENT

This news release may include statements that constitute "forward looking statements" within the meaning of federal securities regulations.� These forward-looking statements include statements related to:� future sales and operating results; company and industry growth, contraction or trends; growth or contraction of the markets in which the company participates; international events, regulatory or legislative activity, or various economic factors; product performance; the generation, protection and acquisition of intellectual property, and litigation related to such intellectual property; new product introductions; development of new products, technologies and markets; natural disasters; the acquisition of or investment in other entities; uses and investment of the company's cash balance; financing facilities and related debt, payment of principal and interest, and compliance with covenants and other terms; the company's capital structure; and the construction and operation of facilities by Cabot Microelectronics Corporation.� These forward-looking statements involve a number of risks, uncertainties, and other factors, including those described from time to time in Cabot Microelectronics' filings with the Securities and Exchange Commission (SEC), that could cause actual results to differ materially from those described by these forward-looking statements.� In particular, see "Risk Factors" in the company's quarterly report on Form 10-Q for the quarter ended June 30, 2014 and in the company's annual report on Form 10-K for the fiscal year ended September 30, 2013, both filed with the SEC.� Cabot Microelectronics assumes no obligation to update this forward-looking information.

�

�

---