Form 8-K CABOT MICROELECTRONICS For: Jan 29

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.� 20549

FORM 8-K

CURRENT REPORT

Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

Date of Report (date of earliest event reported):

January 29, 2015

(Exact name of registrant as specified in its charter)

Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:

o	Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425)

o	Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12)

o	Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b))

o	Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c))

---

On January 29, 2015, Cabot Microelectronics Corporation issued a press release entitled "Cabot Microelectronics Corporation Reports Strong Results for First Quarter of Fiscal�2015," a copy of which is attached hereto as Exhibit 99.1 and incorporated herein by reference.� The press release contains financial and other information including that related to the Company's first fiscal quarter ended December 31, 2014.

This information is being furnished pursuant to Item 2.02 of Form 8-K and shall not be deemed "filed" for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended (the "Exchange Act"), or incorporated by reference in any filing under the Securities Act of 1933, as amended, or the Exchange Act, except as shall be expressly set forth by specific reference in such a filing.

---

SIGNATURE

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned hereunto duly authorized.

---

INDEX TO EXHIBITS

Exhibit 99.1

PRESS RELEASE

���������������������������������������������������������������������������������������������������������������������Contact:

�������������������������������������������������������������������������������������������������������������������Trisha Tuntland

������������������������������������������������������������������������������������������������������������������Director of Investor Relations

�����������������������������������������������������������������������������������������������������������������Cabot Microelectronics Corporation

���������������������������������������������������������������������������������������������������������������������(630) 499-2600

CABOT MICROELECTRONICS CORPORATION REPORTS STRONG

RESULTS FOR FIRST QUARTER OF FISCAL 2015

��������������������������������������������������������������������������������������������Revenue of $111.9 Million, 11.4 Percent Higher Than Last Year

�������������������������������������������������������������������������������������������Gross Profit Margin of 50.9 Percent of Revenue, Up 340 Basis Points Year-Over-Year

��������������������������������������������������������������������������������������������Record Earnings Per Share of 80 Cents, Up 77.8 Percent Compared to Last Year

���������������������������������������������������������������������������������������������Cash Flow From Operations of $21.7 Million

�

�

AURORA, IL, January 29, 2015  Cabot Microelectronics Corporation (Nasdaq:� CCMP), the world's leading supplier of chemical mechanical planarization (CMP) polishing slurries and a growing CMP pad supplier to the semiconductor industry, today reported financial results for its first quarter of fiscal 2015, which ended December 31, 2014.

Total revenue during the first fiscal quarter was $111.9 million, 11.4 percent higher than the same quarter last year.� The company achieved record quarterly revenue in its Tungsten product area for the third consecutive quarter, and double digit year-over-year revenue growth in its Aluminum, Tungsten, Pads and Advanced Dielectrics product areas.� The company recorded a gross profit margin of 50.9 percent of revenue in the first fiscal quarter, which is 340 basis points higher than in the same quarter last year.� The company also achieved record diluted earnings per share of $0.80, representing an increase of 77.8 percent compared to the same quarter last year.� Cash flow from operations was $21.7 million.� The company's balance sheet reflects a cash balance of $295.4 million and $170.6 million of debt outstanding as of December 31, 2014.� During the quarter, the company purchased $15.0 million of stock under its share repurchase program.

"We are delighted with our very strong start to fiscal 2015, reflecting 11 percent revenue growth compared to last year, and including double digit revenue growth in most of our IC CMP product areas.� In addition, we achieved a significantly higher gross margin percentage, as well as a record level of profit for our company," said David Li, President and CEO of Cabot Microelectronics.� "We believe our results are evidence of the continued successful execution of our strategic business initiatives, including closely collaborating with our strategic customers, technology leadership and global supply chain excellence.� Looking ahead, we expect to continue to partner with our technology leading customers to innovate and commercialize leading-edge CMP solutions to meet their challenging product performance requirements."

Total first fiscal quarter revenue of $111.9 million represents a 11.4 percent increase from the $100.5 million reported in the same quarter last year, including 10.2 percent revenue growth from the company's IC CMP consumables products.� In particular, the company achieved record quarterly revenue for the third consecutive quarter in its Tungsten product area, which grew 20.8 percent year-over-year.� Compared to the same quarter last year, revenue from the company's Aluminum, Pads and Advanced Dielectrics product areas grew 35.6 percent, 18.2 percent and 18.1 percent, respectively.� Revenue from slurries for Interlayer Dielectrics and Data Storage applications decreased.� Foreign exchange effects reduced revenue by $1.2 million year-over-year, primarily due to the weaker Japanese yen versus the U.S. dollar.

Gross profit, expressed as a percentage of revenue, was 50.9 percent this quarter, which is 340 basis points higher than the 47.5 percent of revenue reported in the same quarter a year ago.� Compared to the year ago quarter, gross profit percentage increased primarily due to product mix, higher sales volume and benefits associated with foreign exchange rate changes, partially offset by effects of lower manufacturing yields, higher raw material costs, and higher fixed manufacturing costs.� The company's full fiscal year gross profit guidance range of 48 to 50 percent of revenue remains unchanged.

Operating expenses, which include research, development and technical, selling and marketing, and general and administrative expenses, were $34.4 million in the first fiscal quarter, or $2.4 million higher than the $32.0 million reported in the same quarter a year ago, primarily due to separation costs associated with the departure of three executive officers, which was announced on January 5, and higher incentive compensation costs.� The company continues to expect operating expenses for the full fiscal year to be between $132 million and $137 million.

Net income for the quarter was $19.9 million, which is 76.1 percent higher than $11.3 million reported in the same quarter last year.� Net income increased primarily due to higher revenue, a higher gross profit margin and a lower effective tax rate, partially offset by higher operating expenses.� The company's effective tax rate was lower primarily due to lower income tax expense on foreign earnings and the reinstatement of the U.S. research and experimentation tax credit.

Diluted earnings per share were $0.80 this quarter, which represents a record level for the company, and an increase of 77.8 percent compared to $0.45 reported in the same quarter last year.

CEO TRANSITION

On December 16, 2014, the company announced that its Board of Directors had elected David H. Li as President and CEO and member of the Board, effective January 1, 2015, and that William P. Noglows, who served as Chairman, President and CEO since 2003, will continue to serve as Executive Chairman of the Board of Directors.� A copy of the related press release is available in the investor relations section of the company's website, www.cabotcmp.com.� For additional information, see the company's current report on Form 8-K, and Proxy Statement, filed with the Securities and Exchange Commission (SEC) on December 16 and January 20, respectively.

�

�

---

�

CONFERENCE CALL

Cabot Microelectronics Corporation's quarterly earnings conference call will be held today at 9:00 a.m. Central Time.� The conference call will be available via live webcast and replay from the company's website, www.cabotcmp.com, or by phone at (844) 825-4410.� Callers outside the U.S. can dial (973) 638-3236.� The conference code for the call is 62097135.� A transcript of the formal comments made during the conference call will also be available in the Investor Relations section of the company's website.

ABOUT CABOT MICROELECTRONICS CORPORATION

Cabot Microelectronics Corporation, headquartered in Aurora, Illinois, is the world's leading supplier of CMP polishing slurries and a growing CMP pad supplier to the semiconductor industry.� The company's products play a critical role in the production of advanced semiconductor devices, enabling the manufacture of smaller, faster and more complex devices by its customers.� The company's mission is to create value by developing reliable and innovative solutions, through close customer collaboration, that solve today's challenges and help enable tomorrow's technology.� The company has approximately 1,050 employees on a global basis.� For more information about Cabot Microelectronics Corporation, visit www.cabotcmp.com or contact Trisha Tuntland, Director of Investor Relations at 630-499-2600.

SAFE HARBOR STATEMENT

This news release may include statements that constitute "forward looking statements" within the meaning of federal securities regulations.� These forward-looking statements include statements related to:� future sales and operating results; company and industry growth, contraction or trends; growth or contraction of the markets in which the company participates; the company's management, international events, regulatory or legislative activity, or various economic factors; product performance; the generation, protection and acquisition of intellectual property, and litigation related to such intellectual property; new product introductions; development of new products, technologies and markets; natural disasters; the acquisition of or investment in other entities; uses and investment of the company's cash balance; financing facilities and related debt, payment of principal and interest, and compliance with covenants and other terms; the company's capital structure; and the operation of facilities by Cabot Microelectronics Corporation.� These forward-looking statements involve a number of risks, uncertainties, and other factors, including those described from time to time in Cabot Microelectronics' filings with the SEC, that could cause actual results to differ materially from those described by these forward-looking statements.� In particular, see "Risk Factors" in the company's annual report on Form 10-K for the fiscal year ended September 30, 2014, filed with the SEC.� Cabot Microelectronics assumes no obligation to update this forward-looking information.

�

�

�

---