ExhaustFlow Technologies™ Addresses Growing AI Infrastructure Cooling Crisis
Patented Airflow Management System Delivers Up to 25% More Cooling Capacity for Existing Data Center Chiller Plants - New and Retrofit Installations
With data center operators under increasing pressure to deliver more cooling capacity from existing infrastructure as AI compute density grows, EFT's patented system (
The Problem: A
In a dense air-cooled chiller array, hot discharge air from one unit recirculates back into the condenser intake of neighboring units. The result is condenser inlet temperatures running 10 to 30 degrees Fahrenheit above actual ambient conditions -- a condition that silently degrades chiller capacity, increases electrical demand, and forces operators to oversize equipment to compensate for performance losses that were never inevitable.
As AI workloads drive heat rejection densities higher in mechanical yards that were not originally designed for today's compute intensity, the recirculation effect worsens. Operators respond by adding equipment, increasing electrical infrastructure, and absorbing higher energy costs -- all without addressing the root cause.
"The data center industry is spending significant capital responding to AI-driven density growth," said
The Solution: Patented Airflow Management at the Source
EFT's patented integrated base system captures and routes clean ambient air from outside the recirculation zone, displacing hot discharge air before it re-enters the chiller condenser intake. The result is uniform inlet temperature conditions across the entire chiller array -- as if each unit were operating as a standalone installation with no neighboring thermal interference.
Computational Fluid Dynamics (CFD) modeling across multiple chiller plant configurations confirms the following performance improvements:
Performance Metric | Without EFT | With EFT |
Chiller efficiency (kW/ton) | 1.28 | 1.04 (18.8% improvement) |
Input kW | 513 kW | 415 kW (19.1% reduction) |
MCA (wire sizing) | 818 amps | 650 amps (20.5% reduction) |
MOP (breaker sizing) | 1,200 amps | 800 amps (33.3% reduction) |
Cooling capacity increase | -- | Up to 25% |
Water consumption | Varies | Zero (WUE of 0) |
Source: EFT CFD modeling, 400-ton air-cooled chiller application.
Retrofit Availability: Addressing Existing Data Center Chiller Plants
EFT's integrated base system is specifically designed for both new construction and retrofit installations. For the thousands of existing data center chiller plants already dealing with air recirculation, the system offers a direct corrective solution with the following characteristics:
- Integrates directly into existing chiller arrays without modifying chiller internals or controls
- Often utilizes existing dunnage -- no major structural work required
- Installation proceeds while the plant continues operating -- no equipment downtime required
- Compatible with all major chiller and dry cooler manufacturers
- Site-specific CFD modeling available to quantify projected performance improvements prior to installation
"Most of the data center chiller plants dealing with recirculation problems today have been running with this condition since commissioning," said Breisch. "Operators have worked around it for years. EFT gives them a direct engineering solution without replacing equipment or taking systems offline."
Industry Validation
On
Since ExhaustFlow Technologies launched publicly in
AI Infrastructure Context
The growth of agentic AI and large language model infrastructure is placing unprecedented demands on data center cooling systems. As compute density increases, the heat rejection burden on air-cooled chiller plants rises proportionally. Industry research indicates that a significant portion of current cooling infrastructure is unable to meet the performance requirements of modern AI workloads.
EFT's patented approach addresses this constraint directly -- not by adding more equipment or consuming more resources, but by enabling existing chiller infrastructure to operate closer to its original design specifications. The result is more cooling capacity, lower electrical demand, and reduced infrastructure requirements from equipment already installed and operational.
About ExhaustFlow Technologies
ExhaustFlow Technologies™ is a patented airflow management company based in Salem, New Hampshire. The company's integrated base system for air-cooled chillers and dry coolers minimizes condenser air recirculation, stabilizes coil entering conditions, and provides predictable, high-efficiency performance for data center chiller plants. EFT's technology is protected under U.S. Patent No. 12,372,268 and is available for new construction and retrofit installations. For more information visit www.eflowt.com or contact [email protected].
View original content to download multimedia:https://www.prnewswire.com/news-releases/exhaustflow-technologies-addresses-growing-ai-infrastructure-cooling-crisis-302824770.html
SOURCE ExhaustFlow Technologies
Serious News for Serious Traders! Try StreetInsider.com Premium Free!
You May Also Be Interested In
- In HelloNation, Plumbing Expert Ken Settje Explains When Plumbing Replacement Is Necessary in Older Homes
- Replay Sports Cards Signs First New York Franchisee Ahead of Fanatics Fest 2026
- InventHelp Inventor Develops Solar Rechargeable Carrier (OCM-1754)
Create E-mail Alert Related Categories
PRNewswire, Press ReleasesSign up for StreetInsider Free!
Receive full access to all new and archived articles, unlimited portfolio tracking, e-mail alerts, custom newswires and RSS feeds - and more!



Tweet
Share